|
Post by jayaruh on Apr 22, 2018 10:51:15 GMT -6
No progress pictures for this one. I worked on this for parts of three days. I did this one without the lathe, so it is not "perfectly round." First, I glued four pieces of wood together. After the glue dried, I cut them in half, and glued them together again. I cut off one more piece and glued it to one end. After the glue dried, I squared up the sides and cut it to length. I cut off the edges to make it octagonal in shape. Then, I used a drum sander to round off the corners and eventually make it round. Then I began to give it the shape of a brush handle. Next, I drilled the hole for the knot. Finally, I branded it, and then finished it with polycrylic. I set it with an Ace synthetic knot. Here are pictures of the finished product, Jayaruh #286.
|
|
|
Post by carlfrommo on Apr 22, 2018 11:47:45 GMT -6
I think it "turned out" really nice. (See what I did there?) Reminiscent of a barber pole from the side view.
|
|
|
Post by Trout Whisperer on Apr 22, 2018 14:23:15 GMT -6
|
|
|
Post by jayaruh on Apr 22, 2018 14:48:42 GMT -6
I think it "turned out" really nice. (See what I did there?) Reminiscent of a barber pole from the side view. I see what you did there. It did take a lot of turning, just not on a lathe.
|
|
|
Post by jayaruh on Apr 22, 2018 14:49:17 GMT -6
|
|
|
Post by Petrvs on Apr 22, 2018 14:50:37 GMT -6
Wow Jim, wonderful work. Simply beautiful.
|
|
|
Post by wchnu on Apr 22, 2018 18:29:33 GMT -6
Another example of the top class work of the offical brush maker. That is TOSTEE worthy...
|
|
|
Post by grassy on Apr 23, 2018 1:38:42 GMT -6
That's a great looking brush!
|
|
|
Post by jayaruh on Apr 23, 2018 10:25:44 GMT -6
I just finished making this animation.
|
|
|
Post by carlfrommo on Apr 24, 2018 5:45:58 GMT -6
Nice animation. I think the brush really shows it's character when looking at the different views.
|
|
zykris
Lather Catcher
Tuggy against the grave...
Posts: 882
|
Post by zykris on Apr 24, 2018 8:22:43 GMT -6
Very nice!
|
|
|
Post by GarnerPW on Apr 24, 2018 18:43:18 GMT -6
Nice work Jim.
|
|