|
Post by kfralin on Jan 26, 2019 11:56:59 GMT -6
I have seen that gizmo before. Certainly looks like it would do the trick. Looks to create around a 15 degree angle, does that sound about right? BTW, thanks for information.
|
|
|
Post by twhite on Jan 26, 2019 11:58:35 GMT -6
I have seen that gizmo before. Certainly looks like it would do the trick. Looks to create around a 15 degree angle, does that sound about right? BTW, thanks for information. Yes 12-15 deg
|
|
|
Post by kfralin on Jan 26, 2019 12:12:44 GMT -6
I have seen that gizmo before. Certainly looks like it would do the trick. Looks to create around a 15 degree angle, does that sound about right? BTW, thanks for information. Yes 12-15 deg Tom, could you tell me the height of the original stone if you get the chance. Thanks again for the most useful of information. I find modern PTFE blades work just fine but I also find sharpening things to be therapeutic.
|
|
|
Post by jayaruh on Jan 26, 2019 18:32:21 GMT -6
|
|
|
Post by twhite on Jan 28, 2019 12:28:43 GMT -6
Tom, could you tell me the height of the original stone if you get the chance. Thanks again for the most useful of information. I find modern PTFE blades work just fine but I also find sharpening things to be therapeutic. Unfortunately I do not have it. I loaned it to GarnerPW maybes he can measure it for you. Tom
|
|
|
Post by kfralin on Jan 28, 2019 19:44:29 GMT -6
Tom, could you tell me the height of the original stone if you get the chance. Thanks again for the most useful of information. I find modern PTFE blades work just fine but I also find sharpening things to be therapeutic. Unfortunately I do not have it. I loaned it to GarnerPW maybes he can measure it for you. Tom No problems, I’m sure I can figure it. I suspect it will be a bit of T&E anyway.
|
|
|
Post by twhite on Jan 28, 2019 19:58:39 GMT -6
Unfortunately I do not have it. I loaned it to GarnerPW maybes he can measure it for you. Tom No problems, I’m sure I can figure it. I suspect it will be a bit of T&E anyway. Yes it is. I actually used shims to get a good angle on different type of blades. It is fun figuring it out.
|
|
|
Post by kfralin on Jan 28, 2019 20:15:49 GMT -6
No problems, I’m sure I can figure it. I suspect it will be a bit of T&E anyway. Yes it is. I actually used shims to get a good angle on different type of blades. It is fun figuring it out. Once I get the device in my hands and fail enough times, I may have to pick your brain a bit more. Maybe it won’t come to that...who knows. I get a really rusty bunch of vintage blades to practice on.
|
|